4.Route the adapter’s cord through the strain relief slot on the base.
Strain Relief
Slot
5.Plug the adapter into a standard AC outlet. The POWER indicator on the base lights.
6.Lift the base’s antenna to a verti- cal position.
2.Route the modular cord through the upper groove on the bottom of the base.
Upper
Groove
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
Mounting the Base on a
Wall Plate
1. Plug one end of the supplied short modular cord into the TEL LINE jack on the back of the base.
4. Route the adapter’s cord through the right side of the strain relief slot on top of the base and through both the upper and lower grooves on the bottom of the base.
Strain Relief
Slot
Upper
Groove
Lower
Groove
7
