![MEMORY OPERATION](/images/new-backgrounds/12106/1210657x1.webp)
MEMORY OPERATION
Your
STORING A TRANSMIT/RECEIVE FREQUENCY
1.Press MR. and the last used memory location appear.
2.Repeatedly press or
to select the desired memory location.
3.Press FUNC+MR. The selected memory location and flash.
4. Select | the desired frequency by repeatedly pressing |
or | , or use direct frequency entry to select a frequency. |
5.To enter a frequency offset for repeater operation, press FUNC + SC. The or
to select the desired offset. Press PTT to store your setting.
6.Press FUNC + REV to select the offset direction (+ or
7.If desired, set the tone squelch settings (see “Continuous Tone Coded Squelch System Features” on Page 35).
8.Press PTT to store all settings, then press MR to exit the memory mode.
29