Radio Shack Kameleon 4-in-One Clearing ALL Programming, Troubleshooting, Clearing All Programming

RS 4in1 Kam User Manual.fm Page 14 Friday, March 4, 2005 9:09 AM

4-IN-ONE REMOTE POWERED BY KAMELEON

2. Using the number keys, enter 9 8 0. The	PROBLEM:	During programming, the
IR segment will flash twice, pause, and
		IR segment displays a long
flash twice again to confirm that all
		flash.
custom programming is cleared.

CLEARING ALL

PROGRAMMING

The RadioShack 4-in-One Remote contains a Programming Reset program. You can use it to remove all custom programming, including your setup codes and reassigned device keys.

IMPORTANT: Executing this program will erase all custom settings for Volume Lock and Favorite Channels. It will also erase any device codes or reassigned modes.

1.Press and hold P until the IR segment flashes twice.

2.Using the number keys, enter 9 8 1. The IR segment will flash twice, pause, and flash twice again to confirm that all custom programming is cleared.

TROUBLESHOOTING

PROBLEM:	No display at all times.
SOLUTION:	Replace batteries with four
	new AA alkaline batteries.
PROBLEM:	No display when
	programming.
SOLUTION:	Display has turned off due
	to inactivity. Start
	programming again and do
	not pause while performing
	instructions.

SOLUTION:	An invalid entry has
	occurred. Check the keys to
	be pressed and start
	program again.
PROBLEM:	The unit does not control
	home entertainment
	devices or commands are
	not working properly.
SOLUTION:	Try all listed codes for the
	device brands being set up.
	Make sure they can be
	operated with an infrared
	remote control.
PROBLEM:	Favorite channel function
	does not work properly.
SOLUTION:	Some devices (e.g., Cable
	Boxes or Satellite Receivers)
	use two-digit channel
	numbers. During
	programming, press ENTER
	or OK after entering a
	channel number (e.g., 0 2
	ENTER for channel 2). See
	“Programming Favorite
	Channel Scan” on page 10.
PROBLEM:	Cannot find a working code
	using the instructions in
	“Searching For Your Code”
	on page 9.
SOLUTION:	See our website
	(www.radioshack.com) for
	help or take the remote to
	your local RadioShack
	store.
PROBLEM:	Changing channels does not
	work properly.

14 Clearing All Programming