RS 4in1 Kam User Manual.fm Page 12 Friday, March 4, 2005 9:09 AM
4-IN-ONE REMOTE POWERED BY KAMELEON
3.Press DVD then VCR. The VCR key is now ready to be programmed as your second DVD player. (see “Programming A Device” on page 7).
NOTE: Only one device can be assigned to an unused device key at a time.
4.If desired, repeat steps 1 to 3 to reassign another device.
SETTING THE TILT SWITCH
The RadioShack
NOTE: Disabling the Tilt Switch can help conserve battery life.
DISABLING THE TILT SWITCH
1.Press and hold P until the IR segment flashes twice.
2.Using the number keys, enter 9 8 5. The IR segment will flash four times, confirming the Tilt Switch is disabled.
ENABLING THE TILT SWITCH
1.Press and hold P until the IR segment flashes twice.
2.Using the number keys, enter 9 8 5. The IR segment will flash twice, confirming the Tilt Switch is enabled.
for other multiple functions you would like to control with one key press. Moreover, the key you assign to activate your macro can hold up to 15 key presses total.
Macros are not
NOTE: Programming a new macro over the existing one will erase the original macro.
PROGRAMMING A MACRO (EXAMPLE)
Watching a movie can involve a lot of complicated turning on of devices and adjusting control. Or, you can set up RadioShack
1.Press and hold P until the IR segment blinks twice, then release.
2.Press 9 9 5. The IR segment will blink twice.
3.Press Power (or whatever key you want to assign the macro to).
NOTE: You cannot use P, FAV SCAN or the mode keys (TV, VCR, DVD, CBL/SAT) as the macro key.
4.Enter the series of commands you want the macro to execute (up to 15 commands).
NOTE: If there are more than 15 key presses in the sequence, the IR segment will display a long flash denoting an error. The display will return to the last- selected device menu screen. To program the macro, start again with step 3.
USING MACROS
The RadioShack
A macro can be used to control a home theater operation, to set a favorite channel, or
5.Press and hold P until the IR segment blinks twice, then release.
Now, when you press the Power key, the remote will send the series of commands you have entered. For example, you could program the Power key to turn on both your TV and cable box and select a particular channel.
