Radio Shack Kameleon 4-in-One Programming a Device, Adjusting Brightness, Device Table

RS 4in1 Kam User Manual.fm Page 7 Friday, March 4, 2005 9:09 AM

DEVICE TABLE

NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 7.

After programming, the RadioShack 4-in- One Remote will be able to control the following types of devices:

DEVICE KEY CONTROLS THESE DEVICES

VCR or DVR/PVR

Television, TV/VCR

Combo, TV/VCR/DVD

Combo, or TV/DVD

Combo

Cable Box (Converter),

Satellite Receiver, or

Satellite/PVR Combo

DVD Player, DVD/VCR

Player Combo, or Home-

Theater-in-a-Box (HTiB)

Device

ADJUSTING BRIGHTNESS

The RadioShack 4-in-One Remote has five levels of brightness adjustment and is set to the middle one at the factory. To increase or decrease the brightness, perform the following steps:

1.Press and hold P until the IR segment flashes twice.

2.Using the number keys, press 9 7 4. The IR segment flashes twice.

•To increase brightness, press CH+ one or more times.

•To decrease brightness, press CH- one or more times.

3.When the desired brightness is achieved, press P again to exit programming.

OWNER’S MANUAL

NOTE: The remote includes a tilt switch that turns on the display when the unit is moved. If desired, you can disable this feature. See “Setting the Tilt Switch” on page 12.

PROGRAMMING A DEVICE

The RadioShack 4-in-One Remote is preset at the factory to operate the following devices:

•RCA Satellite Box

•RCA TV, VCR, and DVD Player

To control devices other than the default brands, perform the following steps; otherwise skip this section:

1.Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 5 completely before proceeding. Before starting step 2, review the “Manufacturer’s Codes (Códigos del Fabricante)” (starting on page 43). Brands are listed alphabetically in order of most popular ones first. Highlight or write down the devices and the codes you wish to program.

2.Press a device key (i.e., VCR, TV, CBL/SAT, or DVD). The selected device key will animate.

NOTE: Please refer to the “Device Table” on page 7 when choosing a device key for programming.

3.Press and hold P until the IR segment flashes twice.

NOTE: If the display turns off due to inactivity, the remote control will exit programming and return to the last- selected device menu screen. To start programming again, repeat this step.

Adjusting Brightness 7