Radio Shack LK-1500 owner manual Basic Operations, Selecting a Tone, To select a tone

Basic Operations

	KEY LIGHT	TONE
		Number buttons
		[+] / [–]
POWER
MAIN VOLUME	MODE
This section provides information on performing basic		2 Press the TONE button.

keyboard operations.

To play the keyboard

1Press the POWER button to turn the keyboard on.

2 Set the MODE switch to NORMAL.	Indicator appears
3 Use the MAIN VOLUME slider to set the volume	3 Use the number buttons to input the three-digit tone
to a relatively low level.	number of the tone you want to select.
	Example: To select “049 ACOUSTIC BASS”, input 0, 4
4 Play something on the keyboard.	and then 9.

Selecting a Tone	A c o . B a s s
This keyboard comes with 264 built-in tones. Use the
following procedure to select the tone you want.	NOTE

To select a tone	• Always input all three digits for the tone number,
		including leading zeros (if any). If you input one or two
1 Find the tone you want to use in the TONE List and		digits and stop, the display will automatically clear your
		input after a few seconds.
note its tone number.	•	You can also increment the displayed tone number by
• Not all of the available tones are shown on the tone		pressing [+] and decrement it by pressing [–].
	•	When one of the drum sets is selected (tone numbers
list printed on the keyboard console. For a complete
		256 through 263), each keyboard key is assigned a
list, see the “Tone List” on page A-1.
		different percussion sound. See page A-6 for details.
• If the keyboard is connected to a TV, the tone list
appears on the TV screen. For information about
connecting to a TV, see “VIDEO OUT Jack” on page
E-17.

E-18 649U-E-020A