42-4043.fm Page 45 Tuesday, August 3, 1999 6:51 AM

Local (Local Control) (Default: On): set to on to send data simulta- neously to the keyboard’s speakers and as MIDI data. Set to oFF to send data only as MIDI data (the speakers on the keyboard remain silent).

AcompOut (Accompaniment Out) (Default: Off): set to on to send auto accompaniment as MIDI data. Set to oFF to turn it off.

3.Within 5 seconds, use + or to change the setting of the parameter.

DUMPING/IMPORTING DATA

The MD-1600’s internal data, including data recorded to memory and synthesiz- er data, can be sent and received in bulk as MIDI exclusive data through the MIDI terminals. Thus, you can use a comput- er or other MIDI device as an external storage device.

First make connections from the MIDI IN and MIDI OUT terminals to an external device using MIDI cables.

Note: Some software does not support MIDI exclusive data.

See the Owner’s Manual that comes with the receiving device for details.

2.Repeatedly press TRANSPOSE/ TUNE/MIDI on the MD-1600 until the display shows BulkSnd?.

3.Within 5 seconds, press to start data send. Sending appears. The MD-1600 automatically exits the data transfer mode after all the data is sent.

Importing Data

Follow these steps to import dumped data from another device.

1.Repeatedly press TRANSPOSE/ TUNE/MIDI so the display shows

BulkSnd?.

2.Within 5 seconds repeatedly press

or so the display shows

BulkRcv?.

3.Within 5 seconds, press to pre- pare the keyboard to receive data.

4.Start the send operation on the sending device. See the manual that comes with the connected device for details. The MD-1600 automatically exits the data transfer mode after all the data is received.

Dumping Data

Follow these steps to dump data from the keyboard to an external device.

1.Put the other device in its receive standby mode.

45

Page 45
Image 45
Radio Shack MD-1600 owner manual DUMPING/IMPORTING Data, Importing Data, Dumping Data