%NGCTKPI"C"5VQTGF"%JCPPGN
If you no longer want a frequency stored in a channel (and you do not want to replace that frequency with a different one), follow these steps to clear the stored frequency.
1.Hold down SCAN/MAN until C7D appears to stop scanning.
2.Use the number keys to enter the channel number
3.Press PGM. F=C appears.
4.Press 0 then ENT. The frequency number changes to
&&&$&&&& to indicate the channel is cleared.
.KUVGPKPI"VQ"VJG"/CTKPG"$CPM
To listen to the marine bank, press MAR. CHh appears for about 2 seconds, then the scanner starts searching from marine channel 16.
To stop searching the channels, hold down H or G for about 2 seconds. IH9> disappears and C7D appears.
To change the channel manually, press H or G.
To search through the marine bank again, hold down H or
Gfor about 2 seconds. C7Dýdisappears and IH9> appears. To change the searching direction, press H or G.
You can select a marine channel directly. When the scanner stops searching the marine bank, use the number keys to enter the
.KUVGPKPI"VQ"VJG"9GCVJGT"$CPF
To hear your local forecast and regional weather information, press WX. Your scanner begins to scan through the weather band.
Your scanner should stop within a few seconds on your local weather broadcast. If the broadcast is weak, you can press WX again to resume scanning.
%JCPPGN "(TGSWGPE["*/*\+
1162.400
2162.425
3162.450
4162.475
5162.500
Searching the One Touch Banks
19
