Radio Shack PRO-2018 manual 7UKPI2TKQTKV, 6740+06*-61010#0&1, #81+&+0+/#4370%+5

Models: PRO-2018

1 36
Download 36 pages 24.89 Kb
Page 22
Image 22
7UKPI"2TKQTKV[

20-424.fm Page 22 Monday, September 9, 2002 9:44 AM

Special Features

±"016'"±"

If you program a weather frequency into the priority channel and the scanner detects a WX alert tone on that frequency (see “WX

Alert” on Page 20), the scanner sounds the alert tone and 7B;hj

flashes. Press any key to turn off the alarm.

3.Press ENT. The scanner clears any lockouts from all frequencies (except in the marine bank). Or, if you do not want to clear the lockouts, press TUNE/CLEAR.

7UKPI"2TKQTKV[

The priority feature lets you scan through channels and still not miss important or interesting calls on a frequency you select. You can program one frequency into the priority channel. As the scanner scans, if the priority feature is turned on, the scanner checks the priority channel for activity every 2 seconds. ±

1.Press PGM, then press PRI/ALERT. F9> and &&&$&&&& or the previously-stored frequency appear.

2.Enter the frequency you want to enter into the priority channel, then press ENT. The display flashes twice.

To turn on the priority feature, press PRI/ALERT during scanning or searching. FH? appears. The scanner checks the priority channel every 2 seconds and stays on the channel if there is activity. F9> and the frequency appear whenever the scanner is set to the priority channel.

To turn off the priority feature, press PRI/ALERT. FH? disappears.

6740+0)"6*'"-';"610'"10"#0&"1((

The scanner is preset to sound a tone each time you press one of its keys. You can turn the key tone off or back on.

1.If the scanner is on, slide POWER to OFF to turn it off.

2.While you hold down 2 and ENT, turn on the scanner.

3.When e<<ýjed; or edýjed; appear, release 2 and ENT.

#81+&+0)"+/#)'"(4'37'0%+'5

You might hear one of your regular stations on another frequency that is not listed. For example, you might find a service that regularly uses a frequency of 453.275 also on 474.675 MHz. Do the following to determine if you are listening to an image frequency:

Note the new frequency

474.675

Double the intermediate frequency of 10.7 MHz

(21.400)

and subtract it from the new frequency

–21.400

If the answer is the regular frequency

453.275

then you have tuned to an image.

 

22

Page 22
Image 22
Radio Shack PRO-2018 manual 7UKPI2TKQTKV, 6740+06*-61010#0&1, #81+&+0+/#4370%+5