Radio Shack PRO-2018 manual 242#4#6+10, 5ECPPKPI.GICNN, 75+0#%2194, R9#40+0R

Models: PRO-2018

1 36
Download 36 pages 24.89 Kb
Page 4
Image 4
R"9#40+0)"R"

20-424.fm Page 4 Monday, September 9, 2002 9:44 AM

Preparation

R"9#40+0)"R"

To prevent electric shock, do not use the AC adapter's polarized plug with an extension cord, receptacle, or other outlet unless you can fully insert the blades to prevent blade exposure.

."%#76+10".

You must use a

!Class 2 power source that supplies

12V DC and delivers

at least 300 mA. Its center tip must be set to positive and its plug must fit the scanner's DC 12V jack. Using an adapter that does not meet these specifications could damage the scanner or the adapter.

Always connect the AC adapter to the scanner before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the scanner.

2.This device must accept any interference received, including interference that may cause undesired operation.

5ECPPKPI".GICNN["

Your scanner covers frequencies used by many different groups including police and fire departments, ambulance services, government agencies, private companies, amateur radio services, military operations, pager services, and wireline (telephone and telegraph) service providers. It is legal to listen to almost every transmission your scanner can receive. However, there are some transmissions you should never intentionally listen to. These include:

Telephone conversations (cellular, cordless, or other private means of telephone signal transmission)

Pager transmissions

Any scrambled or encrypted transmissions

According to the Electronic Communications Privacy Act (ECPA), you are subject to fines and possible imprisonment for intentionally listening to, using, or divulging the contents of such a transmission unless you have the consent of a party to the communication (unless such activity is otherwise illegal).

This scanner has been designed to prevent reception of illegal transmissions. This is done to comply with the legal requirement that scanners be manufactured so as to not be easily modifiable to pick up those transmissions. Do not open your scanner's case to make any modifications that could allow it to pick up transmissions that are illegal to monitor. Doing so could subject you to legal penalties.

We encourage responsible, legal scanner use.

Mobile use of this scanner is unlawful or requires a permit in some areas. Check the laws in your area.

24'2#4#6+10

75+0)"#%"219'4

You can power the scanner using the supplied 12V, 300 mA AC adapter. To power the scanner using an AC adapter, insert the AC adapter’s barrel plug into the scanner's DC 12V jack. Then connect the other end of the adapter to a standard AC outlet. .

4

Page 4
Image 4
Radio Shack PRO-2018 manual 242#4#6+10, 5ECPPKPI.GICNN, 75+0#%2194, R9#40+0R