A LOOK AT THE DISPLAY
The display has indicators that show the scanner’s operating mode. A good look at the display will help you understand your scanner’s operation.
PRIVATE — appears when you scan the frequencies you stored in the PRI- VATE bank’s channels.
POLICE, FIRE/EMG, AIR, MRN
—appear when you scan the preset frequencies in the named service search bank.
WX — appears when you scan the pre- set weather frequencies.
HOLD — appears when you press HOLD to stop scanning or searching.
SCAN — appears when you scan channels until a frequency appears.
SRCH s or t — appears during a search to show the search direction.
Search Band Range Numbers — ap- pear instead of a frequency to show which of the scanner’s 11 search bands you selected.
L/O — appears when you lock out a channel or frequency or manually se- lect a
MEMO LOSS — appears when you first turn on the scanner until you program the scanner, and when you turn on the scanner after a power loss when the scanner’s memory backup circuit is too weak to save the scanner’s pro- gramming.
Error — appears when you make an incorrect entry.
program the scanner while MEMOLOCK OFF/ON is set to ON (see “Using Memolock” on Page 23).
CH — flashes when you program the scanner.
Channel Number — appears on the left side of the display to show which of the scan bank channels the scanner is tuned to.
18
