Radio Shack PRO-2056 owner manual Replacing The Fuses, Replacing the Fuse in the DC Power Cord

REPLACING THE FUSES

The fuses in the scanner’s DC power cord and DC cigarette-lighter power cord help protect your scanner from power surges and short circuits. If the fuse in the DC power cord has blown, replace it with a 1-amp, fast-acting glass fuse (such as RadioShack Cat. No. 270-1005). For the fuse in the DC cigarette-lighter power cord, replace it with a 2-amp, fast-acting glass fuse (such as RadioShack Cat. No. 270- 1007).

Warnings:

•Before you begin, turn off the scanner and your vehicle’s igni- tion.

•Make sure you replace the fuse only with another fuse of the same type and rating.

Replacing the Fuse in the DC Power Cord

1.Turn off the scanner and your vehicle’s ignition.

2.To open the fuse holder, push the fuse holder ends together, then turn either end counterclockwise and release it.

(add corrected illus F26, deleting curved arrow)

3.If the fuse is blown, replace it.

4.To close the fuse holder, push the fuse holder ends together, then turn either end clockwise.

Replacing the Fuse in the DC Cigarette-Lighter Power Cord

1.Turn off the scanner and your vehicle’s ignition.

2.To open the cigarette-lighter plug, turn the cap counterclockwise and remove it.

3.If the fuse is blown, replace it.

4.Replace the cap.

35