YEnter the frequency you want to start from by using the number keys. (Press ./CLR to enter a decimal point).
ZPress FUNC + 
or 
. The scanner searches, starting from the frequency you entered in Step Y.
If you enter a frequency that is out of range, the scanner sounds an error tone and Error appears.
Press FUNC + 
to change the search direction
downward or FUNC + 
to change the search direction upward. Frequencies appear during the search.
Notes:
•You can set the delay function on or off during the search or while the search stops.
•You can skip a frequency when the search stops. After the search skip frequency is set, the scanner starts direct search again.
Direct Entry Search Hold Mode
To stop searching during direct entry search, press HOLD. HOLD appears. In this mode, pressing FUNC
+
changes the search direction downward and pressing FUNC + 
changes the search direction
upward. 
or 
appears depending on the search direction.
43 | Beyond the Basics |
