Radio Shack PRO-83 manual Using the Display/Key Backlight

[To set up the program, click on Tools, select Configuration, and select PRO-83 (if necessary).

\Turn on the scanner. The scanner automatically goes into the wired programming mode. PGM and WirEd appear. Then send the data from the PC.

Data frame numbers being received appear.

]When the scanner has successfully received all data, End appears. If the scanner received an error while receiving data, End, d-Err, and its frame number appear. If the scanner received a communication error while receiving data, C-Errindicates the packet number where the error occurred. If the scanner received a checksum error while receiving data, S-Errindicates the packet number where the error occurred. If the scanner received a length field error while receiving data, L-Errindicates the packet number where the error occurred.

Using the Display/Key Backlight

To turn on the display/key light for easy viewing at

night, press . The display lights for 15 seconds.

To turn off the light sooner, press again.

53 Beyond the Basics