Follow these steps to clear a single frequency from skip memory so the scanner stops on it during a search.
XPress HOLD to stop the search.
YPress FUNC + 
or FUNC + 
to select the frequency. L/O appears.
ZPress FUNC + L/O. L/O disappears.
To clear all the skip frequencies at once while searching or search hold, press FUNC then press and hold L/O until the scanner beeps.
Notes:
•If you selected all frequencies to be skipped within the search range, the scanner beeps 3 times and does not search.
•If you select more than 50 frequencies to skip, each new frequency replaces a frequency previously stored, beginning with the first stored frequency.
•Press FUNC + 
or FUNC + 
to select a skipped frequency while HOLD appears. L/O appears when you select a skipped frequency.
Beyond the Basics | 46 |
