20-501.fm Page 34 Friday, July 9, 2004 3:23 PM
Repeatedly press 
or 
until the option you want appears, then press E to select it. Otherwise, press ./CLR if you do not want to
select it. Then skip to Step .
Press E while
ALt bEEP: The scanner beeps when a signal stalker signal is detected.
ALt Light: The scanner flashes the display backlight when a signal stalker signal is detected.
ALt
ALt OFF: The scanner does not provide any alert when a signal stalker signal is detected.
Repeatedly press 
or 
until the option you want appears, then press E to select it. Otherwise, press ./CLR if you do not want to select it.
When you select the option, press ./CLR to exit the option mode. Otherwise, to continue normal
scanning, repeatedly press FUNC until disappears then press SCAN.
Beyond the Basics | 34 |
