At least one search bank must be enabled. (The scanner sounds an error tone if you try to disable all the search banks). The search bank and the frequency where chain search starts depends on how the scanner was set before you selected chain search mode.
Chain Search Hold Mode
To start chain search hold mode, press HOLD in chain search mode. The scanner stops searching and HOLD appears. In this mode, pressing
FUNC + 
changes the search direction downward and pressing FUNC + 
changes the
search direction upward. 
or 
appears according to the current search direction.
Pressing 
while 
appears decreases the frequency by one step and pressing 
increases it
by one step. Hold down 
or 
to quickly decrease or increase the frequency. To resume chain
search, press HOLD if 
does not appear on the display or press SRCH if 
appears on the display.
Beyond the Basics | 40 |
