SETTING THE STATION EXTENSION NUMBERS
When you connect more than one Speakerphone, you must also set a dif- ferent extension number for each station so you can use the System’s paging and intercom features.
At each Speakerphone station:
ADJUSTING THE RINGER VOLUME
The Speakerphone has four ringer vol- ume levels — off, low, middle, and high
—for each line. Follow these steps to adjust the ringer volume when the Speakerphone is not being used.
1.Press PROGRAM.
2.Press 
, then #.
3.Enter the extension number
4.Press INTERCOM to store the num- ber. The speakerphone rings once.
Note: If you try to set up a Speaker- phone with an extension number that has already been used for another sta- tion, the speakerphone rings until you select an available extension number.
12
1.Press CONFERENCE.
2.Press 1 or 2 to select the desired phone line.
3.Press VOLUME 
or VOLUME 
to adjust the ringer volume. The Speakerphone rings each time you press VOLUME 
or VOLUME 
.
To turn off the ringer, repeatedly press VOLUME 
until the ringing stops.
To adjust the ringer volume as the phone rings for an incoming call, simply press VOLUME 
or VOLUME 
.
Note: If both lines are ringing at the same time, pressing VOLUME 
or VOL-
UME 
adjusts the ringer volume for both lines.
