Placing the Phone on a
Desk Top
Follow these steps when you place the base on a desk, shelf, or table.
1.Remove the stand from the bottom of the phone by pressing and hold- ing in both spring tabs, then gently pulling the wide end of the stand and lifting it off.
2.Plug one end of the supplied modu- lar cord into the L1 & 2 jack on the bottom of the phone, then route the cord through the TELEPHONE LINE(S) slot.
3.Insert the supplied AC adapter’s barrel plug into the POWER jack on
8
the bottom of the telephone, then route the AC power cord through the AC ADAPTER CORD slot.
Do not plug the adapter into the AC outlet at this time.
Caution: The supplied AC adapter supplies 12V DC, delivers at least 300 mA, and has a plug that proper- ly fits the telephone’s POWER jack. Using an adapter that does not meet these specifications might damage the telephone or the adapter.
4.Insert the tabs on the narrow end of the supplied stand into the upper slots near the center of the phone, push the wide end of the stand until it clicks into place, then place the Speakerphone on the desk.
