5.Plug the modular cord’s other end into the modular phone line jack(s) for Line 1 and Line 2, then plug the AC adapter into a standard AC out- let.
To silence the phone ringing, set the station extension number for the phone (see “Setting the Station Extension Numbers” on Page 12).
2.Insert the tabs on the narrow end of the supplied stand upward into the lower slots near the center of the phone, then push the wide end of the stand until it clicks into place.
Mounting the Phone on a Wall
You can mount your telephone on a wall plate, or you can mount it directly on the wall using two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the telephone.
Note: If you are mounting the phone di- rectly on the wall, drill two holes 315/16 inches (100 mm) apart. Thread the two screws into the wall, letting the heads extend about 3/16 inch (5 mm).
1.Remove the stand from the bottom of the phone by pressing and hold- ing in both spring tabs, then gently pulling the wide end of the stand and lifting it off.
3.Plug one end of the supplied modu- lar line cords into the L1&2 jack on the bottom of the phone, then route the cord through the TELEPHONE LINE(S) slot.
9
