You can still make or receive calls using this phone, and telephones on the same line still ring when there is an incoming call. The IN USE indicator on the base and the TALK indicator on the handset flash until you answer the call.
To turn on the base and handset ring- ers, set RINGER to ON.
Number of Rings
Set the 4/7/TS switch on the back of the base to 4, 7, or TS to select how long the TAD waits before it answers a call (4 rings, 7 rings, or
Note: If you plan to check your messag- es by long distance, set the number of rings to
Setting The Ringer’s Volume
To adjust the ringer’s volume when the phone is not in use, press VOLUME 
or 
on the handset.
12
Checking/Setting the Ringer Tone
You can set the TAD 733’s handset to sound any of four ringer types. The handset is preset to use ringer tone 1. To change or hear the different tones, press FLASH then 1, 2, 3, or 4 when the phone is not in use and RINGER is set to ON. (The tone you hear corresponds to the last number button pressed.)
SETTING THE DAY AND TIME
You must set the day of the week and time so the TAD can record the correct day and time of each message. You can set the day and time with either the handset or the base.
Note: The system does not retain the day and time settings when AC power failure exceeds 2 minutes.
With the Handset
1.Press REMOTE. The REMOTE indi- cator lights.
REMOTE
Indicator
