61-2576.fm Page 16 Wednesday, September 8, 1999 1:50 PM
Wall Outlet Modules (Cat. No. 61- 2685) — These modules completely replace existing wall outlets, but you can only control the top outlet from a Plug ’N Power controller. The bottom outlet is always on.
You can connect appliances or lamps that draw a total of up to 1800 watts to the outlet module. Because you might
use the outlet module to control an appliance, these mod- ules do not respond to the ALL LIGHTS ON command.
Caution: Do not use a Wall Outlet Module to replace an outlet that is controlled by a wall switch. You will lose control of the module if the wall switch is inadvertently turned off.
SETTING THE MODULE CODES
Set the house code dials on all the modules you want the Wireless Remote Control System to control to the same letter as you set on the control center receiver and re- mote control (A through P).
16
