Radio Shack Wireless Remote Control System owner manual Controlling Additional Modules

61-2576.fm Page 18 Wednesday, September 8, 1999 1:50 PM

Follow the procedure in “Controlling Additional Modules” to test each receiver module. See “Intercom Systems” on Page 28 if your system does not work properly.

CONTROLLING ADDITIONAL MODULES

1.Set the remote control's slide switch to the group of 8 modules you want to control (1–8or 9–16). For exam- ple, if you set the switch to 1–8 , the buttons on the remote control will control modules set to 1 through 8.

Notes:

•Button 1 can also turn the receiver module on or off.

•One side of the supplied label has numbers for modules 1 through 8 printed on it, and the other side has numbers for modules 9 through 16. Use the side of the label that matches your installation.

2.Install additional Plug ’N Power modules (sold sepa- rately) as desired, following the instructions included with them.

18