Radio Shack Wireless Remote Control System Fm Page 4 Wednesday, September 8, 1999 150 PM

61-2576.fm Page 4 Wednesday, September 8, 1999 1:50 PM

•Use extreme care when controlling potentially dan- gerous products as part of your Plug ’N Power sys- tem. Use a separate unit code exclusively for such appliances.

•If you want to control fluorescent, mercury vapor, sodium, or low voltage lights, see your local RadioShack store for assistance.

•Do not use Lamp Dimmer Modules to control light fix- tures that have built-in dimmers.

•Do not use Wall Switch or 3-Way Switch Modules to replace switches that control wall outlets or non- lighting devices.

•The Wall Switch and Outlet Modules require direct connection to your house wiring. If you are not famil- iar with typical house wiring installation, we suggest that you have these types of modules professionally installed. In any case, be sure that the electricity is turned off at the circuit breaker or fuse panel while you are installing one of these modules.

•Low-voltage electricity flows through the circuit con- trolled by a Wall Switch Module even when the switch is off. This is necessary for proper operation of the Wall Switch Module. You can completely turn off the electricity by sliding the switch's disable slide switch to off.

4