Radio Shack Wireless Remote Control System fm Page 19 Wednesday, September 8, 1999 150 PM

61-2576.fm Page 19 Wednesday, September 8, 1999 1:50 PM

Caution: Be sure to turn off the power at the main circuit breaker panel before installing Wall Switch Modules or Wall Outlet Modules.

3.Set the house code dial on all your Plug ’N Power modules to the same letter as you set on the remote control module.

4.Set the unit code dial on your Plug ’N Power modules to a number between 1 and 8 (or 9 and 16 if you set the selector switches on the Remote Control to 9-16).

5.To turn the Plug ’N Power modules on or off, press the corresponding button on the remote control for modules set to that unit code.

The first button on the remote control always controls the control center receiver, and all 16 buttons will control oth- er Plug ’N Power modules set to codes 1 through 16.

19