61-2576.fm Page 12 Wednesday, September 8, 1999 1:50 PM
5.Press ON/OFF on the receiver to make sure the light or appliance turns on and off.
6.If
7.Use your fingernail or another object to remove the clear cover over the label on the remote, and write down the location of each Plug ’N Power module you are using with the system on the label. Then press the clear cover back onto the remote.
8.Press the button under ON next to 1 and 9 on the remote control to turn on the light or appliance plugged into the control center module. Or, press the button under OFF next to 1 and 9 on the remote con- trol to turn off the light or appliance.
So far, we have described how to control just one light or appliance that is plugged into the Wireless Remote Con- trol Center. However, you can control up to 16 lights and appliances by using additional lamp modules, appliance modules, and wall switch modules.
12
