Radio Shack XL-110 owner manual ˆFeatures, The Fcc Wants You To Know

12-2014.fm Page 3 Tuesday, May 9, 2000 8:51 AM

ˆFeatures

Your RadioShack High-Power Stereo Amplifi- er produces a total of 110 watts to give add- ed punch and power to your vehicle’s existing auto sound system.

The amplifier produces up to 55 watts per channel of clean, powerful sound at all audio frequencies with minimum distortion. You can connect your auto sound system’s low- level or speaker-level outputs to this amplifi- er.

Its features include:

14K Gold-Plated Noise-Isolated Low-Lev-

el Input Jacks — let you connect low-level (preamplifier) signal inputs to match your auto sound system’s output for the best high-fidelity performance.

14K Gold-Plated Speaker Terminals — de- signed for low impedance, high conductivity, and minimum corrosion, to provide the high- est signal transfer and lowest sound distor- tion.

Input Level Control — lets you adjust the level of the audio signals that enter the am- plifier.

Automatic Power Switching — can auto- matically turn the amplifier on or off when you turn your auto sound system on or off (depending on how you hook up the amplifi- er).

Mute Turn On Circuit — eliminates the thump you hear when you turn on some am- plifiers.

Power Indicator — lights when power is supplied to the amplifier.

Crossover Frequency Circuit — lets you adjust the crossover frequency from 45−400

Hz. This lets you set up the amplifier so you can connect a subwoofer.

Short Circuit Protection — distorts the am- plifier’s sound if any output channel shorts, alerting you to turn off the auto sound sys- tem.

Auto-Off— protects the amplifier by tempo- rarily shutting down if it gets too hot, an out- put channel shorts, or it detects an input overload. The amplifier restarts automatically when it cools or the problem is corrected.

Protection Indicator — lights if the amplifier shuts itself down.

THE FCC WANTS YOU TO KNOW

Your amplifier might cause TV or radio inter- ference even when it is operating properly. To determine whether your amplifier is caus- ing the interference, turn off your amplifier. If the interference goes away, your amplifier is causing it. Try to eliminate the interference by:

•Moving your amplifier away from the receiver

•Contacting your local RadioShack store for help

Features 3