![2.3. Mechanical protective devices](/images/new-backgrounds/83529/8352935x1.webp)
2.3. Mechanical protective devices | 2.4. Electric safety devices | |
The machine is equipped with the following protective | The safety devices provided are: | |
devices: |
| |
| ● 12V low tension push buttons an the DE control | |
● complete panelling protection of all the parts | key panel; | |
subject to heat and of the steam and hot water | ● thermal protection on the pump motor; | |
supplier; | ● safe resistance thermal; | |
● | ● Electronic safety devices. | |
spilt liquids; |
| |
● work surface provided with grill and tray to collect | 2.5. Aerial noise | |
spilt liquids; | Noise level in the working place does not usually | |
● expansion valve in the hydraulic system and valve | ||
exceed 70dB(A). | ||
on the boiler to avoid overpressure; | ||
| ||
● nonreturn valve on the hydraulic system to avoid | 2.6. Vibrations | |
flowing back to the main supply. | ||
| ||
| The machine is supplied with rubber vibration dam- | |
| ping feet. In normal working conditions, the machine | |
| does not produce vibrations harmful to the operator | |
| and the environment. |
3. TECHNICAL DATA |
|
|
|
|
3.1. Dimensions and weights (Fig.4) |
|
|
| |
| 1 GROUP | 2 GROUP | 3 GROUP | 4 GROUP |
|
|
|
|
|
A mm | 690 | 850 | 1090 | 1330 |
|
|
|
|
|
A1* mm | 570 | 730 | 970 | 1210 |
|
|
|
|
|
B mm | 505 | 665 | 905 | 1145 |
|
|
|
|
|
C mm | 500 | 500 | 500 | 500 |
|
|
|
|
|
D mm | 300 | 300 | 300 | 300 |
|
|
|
|
|
H mm | 490 | 490 | 490 | 490 |
|
|
|
|
|
Boiler capacity in litr. | 5 | 11 | 16 | 22 |
|
|
|
|
|
Machine weight kg | 53 | 76 | 94 | 112 |
|
|
|
|
|
Water inlet | 3/8” | 3/8” | 3/8” | 3/8” |
|
|
|
|
|
Ø mm drainage | 14 | 14 | 14 | 14 |
|
|
|
|
|
Packaging |
|
|
|
|
|
|
|
|
|
Volume m3 | 0.27 | 0.44 | 0,55 | 0.67 |
|
|
|
|
|
Dimensions L x P x H mm | 660x670x600 | 910x670x720 | 1150x670x720 | 1390x670x720 |
|
|
|
|
|
Gross weight kg | 63 | 76 | 90 | 108 |
|
|
| ||
*A1 (reduced overall dimensions with side case assembly) |
|
|
You’ll find all the technical data on electric connection, on the machine identification label Fig. 1.
4. USE |
|
The machine have been designed, manufactured and | The operator must always follow the indications con- |
protected to be used to make express coffee and hot | tained in this manual. In the case of a failure or if the |
beverages (tea, cappuccino, etc.). Any other use is to | machine is not working properly, switch it off and do |
be considered unsuitable and therefore dangerous. | not attempt any direct repair. Refer exclusively to a |
| service centre. |
The manufacturer cannot be held respon- sible for any damage caused to people or things due to unsuitable, erroneous or irrational use of the machine.
57