VOLTAGE |
| E |
|
| |
|
| |
BOTTOM |
|
|
AND TOP |
|
|
TEST |
|
|
JACKS |
|
|
|
|
|
READINGS
NEEDED
THAT PRO-
DUCE 100
MILLIWATTS
Please Note!! Do not use this man- ual method, for refer- ence only!! Simply ro- tate power control un- til you get the “green light”!!
1.0 | 1.00 |
| |
| |
1.1 | .910 |
1.2 | .840 |
|
|
1.3 | .770 |
1.4 | .720 |
| |
1.5 | .670 |
1.6 | .630 |
1.7 | .590 |
| |
1.8 | .560 |
1.9 | .530 |
2.0 | .500 |
2.1 | .480 |
2.2 | .455 |
2.3 | .435 |
2.4 | .420 |
| |
2.5 | .400 |
2.6 | .385 |
2.7 | .370 |
2.8 | .360 |
2.9 | .345 |
3.0 | .335 |
3.1 | .325 |
3.2 | .315 |
3.3 | .305 |
3.4 | .295 |
3.5 | .285 |
3.6 | .280 |
3.7 | .270 |
3.8 | .265 |
3.9 | .255 |
4.0 | .250 |
4.1 | .245 |
4.2 | .240 |
4.3 | .233 |
4.4 | .228 |
4.5 | .223 |
4.6 | .218 |
4.7 | .213 |
4.8 | .210 |
4.9 | .205 |
5.0 | .200 |
5.1 | .197 |
| |
5.2 | .193 |
5.3 | .189 |
5.4 | .186 |
5.5 | .183 |
5.6 | .180 |
5.7 | .177 |
5.8 | .174 |
5.9 | .171 |
I
CURRENT
MIDDLE
AND BOT
TEST
JACKS
1.00 VOLT
EQUALS
100 MILLI AMPS AC- TUAL CUR-
The manual method in- volves simply involves taking 2 voltage readings and referring to the power chart in this man- ual. Adjust the power pot until you are at the legal power level. Turn
the audio pot all the way down. Take your voltage reading, take this reading with the meter
leads in the same posi- tion as when you were tuning. Now place your Black (negative) test lead in the bottom test hole pad & your Red (Positive) test lead in the middle test hole pad. This will measure your Current.
Your power should not exceed 100 milliwatts or .1 Watt to comply with FCC rules (Part 15). See the conversion table supplied for different combinations of Voltage and Current that equal 100 milliwatts. The “Power Adjust” works just like a volume control. Clockwise is more power and counter clockwise is less. Again with the AM1000T “Green light” simply adjust Power level con- trol until the LED is green.
13
