Rangemaster Classic 110 manual Griddle, Warmer, Grill, Control Panel and Doors, Ovens

Models: Classic 110

1 32
Download 32 pages 26.12 Kb
Page 15
Image 15

When reassembling the Wok burner, turn over the large base ring and find the ‘D’ shaped area.

Turn the head until the ‘D’ matches the one on the burner base. Turn the head over and place it on the burner base. To fit the small inner burner, find the larger electrode notch in the burner rim. Line this up with the white ignition electrode and place the inner burner on the large base ring.

Now fit the two trim rings, making sure that they are sitting down properly.

Griddle

Always clean the griddle after use. Allow to cool completely before removing. Immerse the griddle plate in hot soapy water. Use a soft cloth or, for stubborn stains, a nylon washing up brush.

NEVER USE CAUSTIC OR ABRASIVE CLEANERS AS THESE WILL DAMAGE THE SURFACE.

The Warmer

Wipe with a soft cloth that has been soaked in hot soapy water and then wrung out. Avoid using abrasive cleaners, which may mark the glass surface.

Grill

The face of the grill burner will darken with use - this is perfectly normal. Any fat or grease will burn off. Do not try to clean it - the small holes could get blocked and affect burner performance.

The grill pan and grid should be washed in hot soapy water. Stubborn particles may be removed from the grid by using a nylon brush.

Control Panel and Doors

The control panel and control knobs should only be cleaned with a soft cloth wrung out in clean hot soapy water - but take care that no surplus water seeps into the appliance. Wipe with a clean dampened cloth then polish with a dry cloth. The oven doors should only be cleaned with a soft cloth wrung out in clean hot soapy water.

The Ovens

Cleaning is easier if carried out while the oven is still warm. Before cleaning, cover the burner to prevent the burner holes becoming blocked.

The inside of the oven and inner door panel can be cleaned using any cleaner bearing the Vitreous Enamel Association (VEA) label.

Take care not to disturb the oven thermostat temperature sensor at the top of the oven opening.

The enamelled oven burner trim (supplied with some models only) can be removed for cleaning.

The oven burner trim hooks onto the front of the oven burner bracket.

When refitting make sure that the trim is in the middle of the front of the oven burner bracket.

15

Page 15
Image 15
Rangemaster Classic 110 manual Griddle, Warmer, Grill, Control Panel and Doors, Ovens