You will need the following equipment to complete the cooker installation satisfactorily
STABILITY BRACKET
If the cooker is to be supplied with gas through a flexible hose, a stability bracket or chain must be fitted.
These are not supplied by with the cooker but are available at most builders merchants.
GAS PRESSURE
TESTER
FLEXIBLE GAS HOSE
Must be in accordance with the relevant standards. For LP Gas it should be suitable for LPG, capable of 50mbar pressure, 70°C temperature rise and carry a red stripe, band or label.
MULTIMETER
(for electrical checks)
You will also need the following tools:
1.Electric drill
2.Masonry drill bit
(only required if fitting the cooker on a stone or concrete floor)
3. Rawlplugs
(only required if fitting the cooker on a stone or concrete floor)
4.Steel tape measure
5.Cross head screwdriver
6.Flat head screwdriver
7.4mm & 3mm Allen keys
8.Spirit level
9.Pencil
10.Adjustable spanner
11.Screws for fitting stability bracket
24
