Rangemaster E64000, E6448SS Install Light Bulbs, Reinstall Grease Drip Rail and Filters

13. INSTALL LIGHT BULBS

!WARNING

In order to prevent the risk of personal injury, do not install a lamp identified for use only in enclosed fixtures.

This hood must use 120 V, 50 W, MR16 with GU10 base or PAR16 with GU10 base, shielded halogen lamps (not included).

1.Install lamps by placing the bulb leads into their grooves in the socket.

2.Gently push upwards and turn clockwise until secure.

12

HO0090

!WARNING

In order to prevent the risk of personal injury, the halogen lamps must be cooled down before removing them.

To remove lamps, gently push upwards and turn counterclockwise to disengage bulb leads from their grooves. NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb.

14. REINSTALL GREASE DRIP RAIL AND FILTERS

CAUTION

Remove protective plastic film covering filters before installing them.

Reinstall grease drip rail. The illustration beside shows how to reinsert the grease drip rail into the range hood.

NOTE: Assemble the metal handles to the filters, using no. 8-32 x 1/4” screws provided, before reinstalling them in the hood.

It is recommended to install side filters first and finish with center one(s).

1.Insert one end of the filter into the upper channel of the hood.

2.Raise the other end toward the inside of hood and insert in the grease drip rail of the hood.

HD0241

1

2

HD0242

- 12 -