4. REMOVE FILTERS AND GREASE DRIP RAIL
A.Remove tape on filters.
Remove filters from hood and set aside.
NOTE: It is recommended to start with the center one(s).
B.Remove tape on grease drip rail (1). Lift out grease drip rail and set aside.
| 1 |
A | B |
HD0240 |
|
5.REMOVE THE ADAPTER (INTERNAL BLOWER HOODS ONLY)
SINGLE BLOWER HOOD
Remove both screws retaining the adapter/damper (1) from inner top of the hood.
1
HD0259
DOUBLE BLOWER HOOD
First unplug both blower motors (1) before removing 3 screws retaining the adapter (2) from inner top of the hood.
NOTE: The double blower hood adapter is sent unfold. See beside.
Fold the adapter and insert the male part (grey section shown in inset) into the female part (white section shown in the inset). Then, fold over each male and female end to finalize assembling the adapter.
1
2 |
HD0339 |
HD0284 |
- 8 -
