Rangemaster R6012 Glide-outGrill, Removing the Oven Shelf Supports, Removing the Oven Linings

Removing the Oven Shelf Supports

The oven shelf supports can be easily removed for cleaning. First remove the all of the oven shelves and the grill pan. Squeeze the two lower wires of the oven shelf frame together to clear the retaining peg (Fig.5-3). Turn the frame into the oven cavity and drop clear of the supporting holes.

Removing the Oven Linings

Some of the lining panels can be removed for cleaning. You will need to remove the shelves and supports before removing the panels.

Each lining panel is held in place by the oven shelf support and a fixing tab at the top of each panel (Fig.5-4). Simply lift each side panel upwards and then pull them forwards.

Once the linings are removed, the oven enamel interior can be cleaned.

Glide-out Grill

The grill pan and grid should be washed in hot soapy water. After grilling meats or any foods that soil, leave to soak for a few minutes immediately after use. Stubborn particles may be removed from the grid using a nylon brush. Alternatively, the grill pan can be washed in a dishwasher.

Before you remove any of the grill parts for cleaning, ensure that they are cool, or use oven gloves.

The grill pan can be easily removed for cleaning by lifting it off the smooth-glide arms.

For safety's sake, push the arms back into the grill chamber.

Each smooth-glide arm is held in place on the support by 2 spring-loaded retaining brackets.

To remove the arm, first remove the oven shelf support from the oven. This will give access to the 2 retaining clips on the back face of the smooth-glide arm. Carefully pull open the spring clips and lever the brackets away from the wire support (Fig.5-5).

DO NOT use any abrasive substances. DO NOT put the side runners in a dishwasher.

To refit a smooth-glide arm, locate the 2 retaining brackets onto the support then push both brackets back onto the wire frame until the spring clips ‘snap’ the arm into place.

Refit the wire supports to the oven. Replace the grill pan onto the smooth-glide arms.

Fig.5-3

�������������������������������������

Fig.5-4

ArtNo.325-0021 BI oven removing the liners

Fig.5-5

����������

�������

���������

�������

�������������ArtNo.325-0007 - Fitting the smooth-glide arm

����

13