Manuals / Rangemaster / Kitchen Appliance / Range

Rangemaster U106140-05 manual Dear Installer, You will also need the following tools, Multimeter

Models: U106140-05

1 36

Download 36 pages 24.7 Kb

Page 23

Dear Installer

Dear Installer

Before you start your installation, please complete the details BELOW.

If your customer has a problem relating to your installation they will be able to contact you easily. Thank you

Installer’s Name

Installer’s Company

Installer’s Telephone number

You will need the following equipment to complete the cooker installation satisfactorily

STABILITY BRACKET If the cooker is to be supplied with gas through a flexible hose, a stability bracket or chain must be fitted.

These are not supplied by with the cooker but are available at most builders merchants.

GAS PRESSURE TESTER It is important the gas pressure is set correctly

FLEXIBLE GAS HOSE Must be in accordance with the relevant standards. For LP Gas it should be suitable for LPG, capable of 50mbar pressure, 70°C temperature rise and carry a red stripe, band or label.

A hose is not supplied by with the cooker.

MULTIMETER

(for electrical checks)

Make sure the installation is electrically safe.

You will also need the following tools:

1.Electric drill

2.Masonry drill bit & Rawlplugs (only required if fitting the cooker on a stone or concrete floor)

3.Steel tape measure

4.Cross head screwdriver

5.Flat head screwdriver

6.Spirit level

7.Pencil

8.Adjustable spanner

9.Screws for fitting stability bracket

23

Image 23

Rangemaster U106140-05 manual Dear Installer, You will also need the following tools, Installer’s Name Installer’s Company

Contents

Gas FSD Users Guide Installation & Service Instructions U106140 -Peculiar smells InstallationBe safe Gas and Electricity onContents Do not use this to turn the burners off. The gas Hotplate burnersWarmer The GriddleThe Grill To set the time of day The OvensThe Clock To start and stop the oven automatically To time something that’s cooking minute minderTo stop automatically To activate the key lock Cooking using the timerClock Special Features Key Lock‘S’ Slow cooking Oven cookingOven shelves Storage The HandyrackOven light Approximate Cooking Time Oven cooking guideShelf Position from TopControl Panel and Doors Cleaning your cookerHotplate burners GriddleRemoving the Oven Linings The OvensThe Oven side linings Oven and Grill Cleaning TableHotplate Outside of cookerMoving your cooker Oven ignition faulty TroubleshootingHotplate ignition or hotplate burners faulty Grill Ignition faultyThe oven light is not working Power failureThe oven is not cooking evenly Don’t smoke General Safety InstructionsIf you smell gas 0800Take care that no water seeps into the appliance In the UK InstallationProvision of Ventilation Location of CookerInstaller’s Telephone number Dear InstallerYou will also need the following tools Installer’s Name Installer’s CompanyChecking the parts Positioning the CookerUnpacking the Cooker Levelling Moving the Cookerview from the rear Fitting a stability bracketGas Connection Hotplate check Pressure testingElectrical Connection Electrical checksCustomer care Fitting the oven burner trimOven check Fitting the plinth3.To Remove Side Panels Servicing Notes1To Remove the Control Panel 2.To Remove Hotplate Trays6. To Remove a Thermostat 4.To Remove Ignition/light Switch8. To Change Warmer Switch 5. To Remove Clock15. To Change Grill Electrode 17. To Change Oven Burner Assembly13. To Change Grill Injector 14.To Change Grill Burner22. To Change Oven Door Outer Panel 24. To Adjust an Oven Door Catch Keep20. To Change Oven Electrode 21. To Remove Grill Door28.To Change Ignition Generator 25. To Change Oven Door Seal26. To Change Warmer Neon 27. To Change WarmerCircuit Diagram Connections Technical DataDimensions This cooker is designed for use on either