To fit the small inner burner, find the larger electrode notch in the burner rim. Line this up with the white ignition electrode and place the inner burner on the large base ring.
A - Electrode notch, B - Ignition electrode
Now fit the two trim rings, making sure that they are sitting down properly.
Griddle
Always clean the griddle after use. Allow to cool completely before removing. Immerse the griddle plate in hot soapy water. Use a soft cloth or, for stubborn stains, a nylon washing up brush.
NEVER USE CAUSTIC OR ABRASIVE CLEANERS AS THESE WILL DAMAGE THE SURFACE.
Glide-out™ Grill
Before you remove any of the grill parts for cleaning make sure that they are cool.
The grill pan and grid should be washed in hot soapy water. After grilling meats or any foods that soil, leave to soak for a few minutes in the sink immediately after use. Stubborn particles may be removed from the grid by using a nylon brush. Alternatively the grill pan can be washed in a dish washer.
To remove the grill pan support frame, pull the grill pan forward.
Lift the grill pan clear of the support frame.
The support frame is held to the side rails by two clips on each side.
For each side, support the side rail with one hand and with the other hand lift the frame up and out of the side clips.
For safety, push the side rails back into the grill chamber.
The side rails can be removed to make cleaning the grill chamber easer by unhooking them from the grill chamber sides.
Slides can be wiped clean with soft cloth and mild detergent.
19
