Rangemaster U109941 - 02 manual The Clock, Setting the time of day, Minute Minder

The Clock

Setting the time of day

The LCD clock is shown in (Fig.2-13). When the clock is first connected, the display flashes ( 0.00) and () alternately.

To set the time, turn and hold the Timer knob to the clock symbol () and at the same time turn the Adjusting knob left or right until the clock shows the time of day. Remember this is a 24-hour clock. Let go of the Timer knob and it will spring back to the vertical, oven manual setting.

Minute Minder

Turn the Timer knob to the right to the () minute minder setting – it should click into position (Fig.2-14).

Use the Adjusting knob to set the time you need (Fig.2-15).

You can either turn the knob back to the vertical manual setting () to keep an eye on the time of day, or leave it in the () minute minder position as the time ticks down.

To stop the beeper when it sounds, turn the Adjusting knob anti-clockwise.

To stop the left-hand oven at a specific time of day

Turn the Timer knob to the () position (Fig.2-16).

Use the Adjusting knob to set the time at which the oven is to stop. You can set the oven to turn on at any time over the following 24-hour period. AUTO shows in the display (Fig.2-17).

Turn the Timer knob to the bottom ‘AUTO’ setting. Once the set time is reached, the beeper sounds. Turn the Timer knob to the vertical () to return to manual cooking.

To start and then stop the left-hand oven using the Timer

Before you set the clock, decide on both the ‘cook time’, which is the period of time you want the oven to cook, and the ‘stop time’, which is the time of day at which you want the oven to stop cooking.

You cannot set a start time directly – this is set automatically by a combination of the ‘cook time’ and ‘stop time’.

Turn the Timer knob to the () position (Fig.2-18).

Use the Adjusting knob to set the ‘cooking time’ you need (Fig.2-19).

Turn the Timer knob to the () position. The display will show the current time of day plus the ‘cook time’ you just set. Use the Adjusting knob to set the ‘stop time’ required (Fig.2-20).

The ‘stop time’ is displayed, followed by ‘AUTO’. Set the oven(s) to the cooking temperature you need. Turn the Timer knob to the ‘AUTO’ setting.

When your cooking is finished, the beeper sounds. Turn the Timer knob to the vertical () to return to manual cooking.

ArtNo.300-0005 2BC minute minder setting

ArtNo.300-0006 2BC

minute minder setting 2

ArtNo.301-0007 2BC Stopping the oven 1

ArtNo.301-0008 2BC Stopping the oven 2

ArtNo.301-0009 2BC

Setting the cooking timer

ArtNo.301-0010 2BC

Setting the cookingtime

ArtNo.301-0008 2BC Stopping the oven 2

Fig.2-14

Fig.2-15

Fig.2-16

Fig.2-17

Fig.2-18

Fig.2-19

Fig.2-20

7