WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity before servicing. Check appliance is safe when you have finished.

16.To Replace an Oven Door Seal

Open the oven door. The seal has small hooks that hold it in place by locating into holes in the rear door face on the main oven and oven front face on tall oven. At the corner, pull the seal diagonally away from the door centre until the hook is released (Fig.8-10). Proceed to the next hook and release it in a similar way, and so on.

You can use force if the hooks are stiff, as the old seal will be discarded.

Carefully lift away the inner back. Reassemble in reverse order making sure that the four screws and washers are fully tightened.

17.To Remove the Grill Door

Remove the control panel (see 1). Remove the left-hand side panel (see 2). Remove the centre cover strip (5 screws, 2 top, 2 bottom, 1 in middle). Remove the two countersunk screws (1 each side) securing the grill hinge arms to the front of the grill chamber.

Note: The arms are spring tensioned. Carefully remove the grill door. Retain the gaskets.

Reassemble in reverse order ensuring that the gasket is fitted between the hinge arm and the front of the grill chamber.

ArtNo.320-0004 Oven door keep

Fig.8-9

Fig.8-10

18.To Remove an Oven Element Thermal Cut-out

Disconnect from electricity supply.

Pull the cooker forward to gain access to the cover box. Undo the cover screws and lift clear. The cutout is located on the earth plate beside the oven element connections. Disconnect the cutout wiring. Undo the fixings that secure the cutout to the earth plate and remove. Fit the replacement control and re-assemble in reverse order.

19.To Remove an Oven Inner Back

Disconnect from electricity supply.

Open the door and remove the shelves. Remove the screws and washers securing the inner back to the back of the oven (Fig.8-11). Carefully lift away the inner back. Reassemble in reverse order making sure that the screws and washers are fully tightened.

20.To Remove the Fan Oven Element

Disconnect from electricity supply.

Remove the oven inner back (see 19). Remove the two screws from the top of the element and the one from the bottom of the element inside the oven (Fig.8-12).

Lift the element out carefully, disconnecting the terminals connected to the element (noting their positions).

If it is not possible to disconnect the leads in this way, pull the cooker forward to gain access to the rear.

Remove the screws securing the electric cover to the back sheet, remove the cover and disconnect the terminals from the rear.

ArtNo.320-0005 Oven door rubber seal

Fig.8-11

ArtNo.320-0020 Oven back fixing screws

Fig.8-12

��������������������

ArtNo.321-0005 Fan oven element

25

Page 26 Page 28
Page 27
Image 27
Rangemaster U109941 - 02 To Remove the Grill Door, To Remove an Oven Element Thermal Cut-out, To Remove an Oven Inner Back
Page 26 Page 28

U109941 - 02 specifications

The Rangemaster U109941 - 02 is a remarkable appliance that brings elegance, efficiency, and innovation to modern kitchens. Known for its exceptional performance and stylish design, this range integrates cutting-edge technologies with user-centric features, making cooking a delightful experience.

One of the standout features of the Rangemaster U109941 - 02 is its powerful cooking capabilities. With multiple burners and a spacious oven, it allows home chefs to prepare a variety of meals simultaneously. The burners offer precise temperature control, thanks to their advanced ignition system which ensures quick start-ups and stable flames. This precise control is essential for achieving perfect cooking results, whether you are simmering sauces or searing meats.

The oven of the Rangemaster U109941 - 02 is designed with sophisticated cooking technologies such as fan-assisted convection cooking. This feature distributes heat evenly throughout the oven, resulting in consistently cooked dishes and reducing cooking times. Additionally, the oven comes with multiple cooking modes, including baking, broiling, and slow cooking, providing versatility for diverse culinary techniques and recipes.

Energy efficiency is another hallmark of the Rangemaster U109941 - 02. Equipped with advanced insulation and a high-efficiency heating system, it minimizes energy consumption without compromising performance. This eco-friendly approach not only reduces utility bills but also lessens the environmental impact of cooking.

The design of the Rangemaster U109941 - 02 is equally impressive. It features a sleek, modern aesthetic that complements various kitchen styles, from contemporary to traditional. The materials used in construction are durable and easy to maintain, ensuring that this range withstands the rigors of daily cooking while maintaining its visual appeal.

Safety features are also a priority in the Rangemaster U109941 - 02. With flame failure devices and automatic shut-off functions, the appliance provides peace of mind in busy kitchens, ensuring that safety is never compromised.

In summary, the Rangemaster U109941 - 02 is a top-of-the-line cooking range that combines powerful performance, innovative technologies, and stylish design. Whether you are a home cook or a culinary enthusiast, this appliance stands ready to elevate your kitchen experience.
Top Page Image Contents