Rangemaster WP29M Light Bulbs Replacement, USE and Care, Evolution Hybrid Baffle Filters

16.LIGHT BULBS REPLACEMENT

!WARNING

In order to prevent the risk of personal injury, do not install a lamp identified for use only in enclosed fixtures.

This hood must use 120 V, 50 W, MR16 with GU10 base or PAR16 with GU10 base, shielded halogen lamps (included).

!WARNING

In order to prevent the risk of personal injury, the halogen lamps must be cooled down before removing them.

1. To remove lamps, gently push upwards and turn counterclockwise to disengage bulb leads from their grooves.

NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb.

2.Install the new lamps by placing the bulb leads into their grooves in the socket.

3.Gently push upwards and turn clockwise until secure.

1 2 3

HO0089

17.USE AND CARE

Evolution™ Hybrid Baffle Filters

The Evolution™ hybrid baffle filters should be cleaned frequently. Use a warm detergent solution. Wash more often if your cooking style generates greater grease—like frying foods or wok cooking.

Remove Evolution™ hybrid baffle filters by pushing them towards the back of hood and rotating filters downward. Slide out the secondary micromesh filter from the back of each hybrid baffle filter before cleaning. Baffle filters are dishwasher safe. Clean secondary filters with a warm detergent solution. Allow filters to dry completely before reinstalling them in the hood.

Clean all-metal filters in the dishwasher using a non-phosphate detergent. Discoloration of the filter may occur if using phosphate detergent or as a result of local water conditions—but this will not affect filter performance. This discoloration is not covered by the warranty.

CAUTION

Never attempt to wash the carbon filters in the non-duct kit. Those filters must be replaced by new ones. Refer to the non-duct kit installation instructions for details.

Grease Drip Rail

The grease drip rail should be cleaned frequently. Lift it out from the hood and use a warm detergent solution. As for the baffle filters, wash more often if your cooking style generates greater grease—like frying foods or wok cooking. Allow grease drip rail to dry completely before reinstalling it in the hood.

Blower Cleaning

Remove the filters in order to access the blower. Vacuum blower to clean. Do not immerse in water. Refer to blower instruction manual for more details.

Hood Cleaning

Stainless steel cleaning: How to maintain its “BRIGHT LOOK”

Do:

•Regularly wash with clean cloth or rag soaked with warm water and mild soap or liquid dish detergent.

•Always clean in the direction of original polish lines.

•Always rinse well with clear water (2 or 3 times) after cleaning. Wipe dry completely.

•You may also use a specialized household stainless steel cleaner.

Don’t:

•Use any steel or stainless steel wool or any other scrapers to remove stubborn dirt.

•Use any harsh or abrasive cleansers.

•Allow dirt to accumulate.

•Let plaster dust or any other construction residues reach the hood. During construction or renovation, cover the hood to make sure no dust sticks to stainless steel surface.

Avoid: When choosing a detergent

•Any cleaners that contain bleach will attack stainless steel.

•Any products containing: chloride, fluoride, iodide, bromide will deteriorate surfaces rapidly.

•Any combustible products used for cleaning such as acetone, alcohol, ether, benzol, etc., are highly explosive and should never be used close to a range.

- 10 -