Rangemaster WP29M Install the Hood, Install the ROUGH-IN Plate to the Hood ALL Installations

Models: WP29M

1 12
Download 12 pages 23.36 Kb
Page 8
Image 8

8. INSTALL THE HOOD

Rest the top back cavity of the hood on the wood mounting strip.

CAUTION

Hold the hood until it is completely secured to the wood mounting strip.

Secure the hood to wood mounting strip with (4) screws no. 8 x 3/4” (for 30” and 36” width hoods) or (6) screws (for 42” width and wider hoods) provided at locations shown. Drill (2) 3/16’’ size holes into the drywall for wall anchors through the existing holes in the inside hood back in the locations shown. Then, install the two wall anchors with the remaining no. 8 x 3/4” screws and the (2) washers provided.

For a non-ducted installation, go to step 11, Install the Rough-in Plate.

TOP OF HOOD (INSIDE VIEW)

MOUNTING SCREWS LOCATION

BACK OF HOOD (INSIDE VIEW)

WALL ANCHORS LOCATION

HD0178

9.SELECT BLOWER OPTION (EXTERIOR OR INTERIOR, DUCTED INSTALLATION)

INTERIOR BLOWER: Follow all subsequent steps of this manual.

EXTERIOR BLOWER: Refer to instructions packed with exterior blower and follow steps 11 and up of the present manual.

10.INSTALL TRANSITION TO ROUGH-IN PLATE (INTERIOR BLOWER, DUCTED INSTAL.)

Model 423, 424, 427 453, or 454

Attach transition (if required) to blower rough-in plate.

Use metal duct tape to make all joints secure and air-tight.

NOTE: Model P6 blower plate connects directly to 7’’ round ductwork without a transition.

HO0086

11.INSTALL THE ROUGH-IN PLATE TO THE HOOD (ALL INSTALLATIONS)

11.1ALL INSTALLATIONS:

Run power cable to installation location. Refer to the instructions included with the selected blower/rough-in kit (sold separately) for details on installing the rough-in plate. Install the rough-in plate so that the wiring box is located on the right side as you are facing the hood.

11.2DUCTED INSTALLATIONS ONLY:

For ducting through back of hood, remove existing plate from inside back of hood and attach it to inside top of hood to cover hole. Secure to threaded studs with same (4) nuts.

For ducting through top of hood, existing plate remains in place on inside back of hood.

Connect ducting to transition or rough-in plate as you are installing the rough-in plate. Use duct tape to make all joints secure and air-tight.

WIRING COVER

ROUGH-IN PLATE

ON TOP OF HOOD

LOCKNUTS

LOCKNUTS

PLATE ON BACK OF HOOD

HD0179

12.CONNECT THE WIRING (ALL INSTALLATIONS)

!WARNING

Risk of electrical shock. Electrical wiring must be done by qualified personnel in accordance with all applicable codes and standards. Before connecting wires, switch power off at service panel and lock service disconnecting means to prevent power to be switched on accidentally.

Remove wiring cover from rough-in plate and set aside.

Connect BLACK to BLACK, WHITE to WHITE and GREEN or bare wire under GREEN ground screw. Reinstall wiring cover.

- 8 -

Page 8
Image 8
Rangemaster WP29M Install the Hood, Install the ROUGH-IN Plate to the Hood ALL Installations, Model 423, 424, 427 453, or

WP29M specifications

The Rangemaster WP29M is a sophisticated and versatile cooking appliance designed for both home chefs and culinary enthusiasts. Combining modern aesthetics with advanced cooking technologies, the WP29M brings innovation to the kitchen and enhances the overall cooking experience.

One of the standout features of the Rangemaster WP29M is its powerful cooking capacity. Equipped with multiple cooking zones, including an induction hob and gas burners, this range cooker allows users to prepare a variety of dishes simultaneously. The induction hob offers precise temperature control, ensuring that even the most delicate meals are cooked to perfection. The gas burners provide rapid heat, ideal for traditional cooking methods, allowing for an authentic culinary experience.

The WP29M also boasts a spacious oven compartment, designed for maximum efficiency and convenience. With advanced multifunctional settings, users can choose from various cooking modes such as fan-assisted convection, grilling, and baking. The inclusion of a built-in rotisserie adds an exciting twist, enabling users to create succulent roast dishes effortlessly. Moreover, the oven features a self-cleaning function, making maintenance a breeze.

Durability and design are paramount in the Rangemaster WP29M. Constructed with high-quality materials, this appliance not only stands the test of time but also enhances the aesthetic appeal of any kitchen space. The sleek finish and contemporary design components ensure that it complements modern or traditional kitchen styles. Ergonomically designed controls further add to the user-friendly experience.

Energy efficiency is another defining characteristic of the WP29M. With innovative insulation technology, this range cooker minimizes heat loss, reducing energy consumption without compromising cooking performance. Thus, it offers an eco-friendly cooking solution that aligns with contemporary sustainability goals.

In conclusion, the Rangemaster WP29M represents the perfect blend of style and function. With its powerful cooking capabilities, versatile oven settings, robust build quality, and energy-efficient features, it stands out as a premier choice for anyone looking to elevate their cooking experience. Whether preparing family meals or hosting dinner parties, the WP29M promises to deliver exceptional results every time. Cooking enthusiasts will appreciate the combination of technology and elegance that this appliance brings to the kitchen.