Rangemaster WP29M Select Blower Option And Installation Type, Non-Ducted Installation

1. SELECT BLOWER OPTION AND INSTALLATION TYPE

1.1NON-DUCTED INSTALLATION

For a non-ducted installation, we recommend using interior blower Best model P6 for effectiveness. (Blower sold separately.) The non-duct kit ANKWP Series (sold separately) must be installed. This kit fits hood from 30-inch width up to 48-inch width. See installation instructions included with the non-duct kit ANKWP Series.

1.2DUCTED INSTALLATION

For a ducted installation, either an interior or exterior blower or in-line blower may be used with this hood. The Best WP29M Series must be installed with blower models P6, P12, ILB3, ILB6, ILB9, ILB11, EB6, EB9, EB12 or EB15 only. Other blowers cannot be substituted. (Blowers sold separately.)

Plan where and how the ductwork will be installed.

If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1 up to 8, 11, 12, 14 and up of this manual.

Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. Use metal duct tape to seal duct joints.

ROOF CAP		ROOF
		CAP
	7" (178 mm)	10" (254 mm)
	ROUND DUCT
		ROUND DUCT

DECORATIVE			DECORATIVE
FLUE	6" or 12"	WALL CAP	FLUE or SOFFIT 6" or 12"	WALL
or SOFFIT (152 mm			(152 mm
	or 305 mm)			CAP
			or 305 mm)

HOOD		ROUND
7" (178 mm)	HOOD
		TRANSITION
ROUND
		4½" x 18½" to 10"
ELBOW
		(114 mm x 470 mm
		to 254 mm)
24" TO 30" (609 mm to 762 mm)		(see page 3)
	24" to 30" (609 mm to 762 mm)
ABOVE COOKING SURFACE
	ABOVE COOKING SURFACE
HH0068A	HH0069A
MODEL P6 SINGLE INTERIOR BLOWER	MODEL P12 DUAL INTERIOR BLOWER
TYPICAL DUCTWORK	TYPICAL DUCTWORK

EXTERIOR BLOWER
	10" (254 mm)
	ROUND DUCT
DECORATIVE FLUE
or SOFFIT 6" or 12"	10" (254 mm)
(152 mm	ROUND ELBOW
or 305 mm)	EXTERIOR
	BLOWER
HOOD
24" to 30" (609 mm to 762 mm)
ABOVE COOKING SURFACE
HH0070A
MODEL EB6, EB9, EB12 OR EB15

EXTERIOR BLOWER TYPICAL DUCTWORK

	ROOF CAP
10” ROUND DUCT
IN-LINE BLOWER
	WALL
	CAP
	HOOD
	24” to 30”
	(609 to 762 mm)
	ABOVE
HH0071A	COOKING SURFACE

MODEL ILB3, ILB6, ILB9 OR ILB11

IN-LINE BLOWER TYPICAL DUCTWORK

- 5 -