32 Raymarine Satellite TV Systems

Note: (1)

Raymarine does not recommend changing the satellite

information unless advised to do so by the satellite provider.

(2 )

Vertical and horizontal polarization applies to regions with linear

polarization only.

Setting the local frequency

LNB systems in regions with circular polarization

* Verification methods ** Power supplying methods
SIGNAL - use only signal level for
tracking.
DVB LOCK - use only DVB lock signal
for tracking.
DVB DECODE - verify satellite using
DVB decoding method for tracking.
DSS LOCK - use only DSS lock signal
for tracking.
AUTO - change voltage to LNB by
IRD voltage.
ONLY 13 V - always supply 13 V to
LNB.
ONLY 18 V - always supply 18 V to
LNB.
1. Press YES to enter set up mode.
2. Press NEXT 3 times to enter the
Local frequency menu.
3. Press YES to set local frequency.
4. Select SINGLE LNB type.
PREV - shows previous LNB type.
SELECT - sets the displayed LNB type.
NEXT - shows the next LNB type.
D7973_1
SETUP MODE?
YES NO
D8646_1
SET SAT PAIR?
PREV YES NEXT
D7996_1
SET LOCAL FRQ?
PREV YES NEXT
D7997_1
LNB TYPE : SINGLE
PREV SELECT NEXT
81258_3.book Page 32 Wednesday, November 8, 2006 2:06 PM