Part 4: Operating Instructions
NOTE: Carbon deposits maybe present on the glass and logs. This is normal and must be cleaned when the heater is serviced or the glass door is cleaned. Please refer to the General Glass Information section on page 15.
General Glass Information
Warning: Only glass approved for use by Raypak Australia may be used for replacement. The use of substitute glass will void all warranties.
Take care to avoid breaking the glass.
Warning: Under no circumstances is this appliance to be operated without the front glass or with a broken glass. Replacement of the glass including the gasket as supplied by Raypak Australia should be done by a licensed and qualified service person.
Window Frame Assembly Removal
1.Shut off gas. (see lighting instructions)
2.If the unit has been operating, let it cool.
3.Open the two side doors.
4.Open the clamps on the two sides (Fig. 2)
5.Pull the frame forward.
6.To
Fig. 2 Window frame removal
Glass Cleaning
It is necessary to periodically clean condensation and film from the glass. Condensation, which is normal during start up, forms on the inside of the
Page 11 of 27