glass and causes lint, dust and other
Clean the glass two or three times with a
After the initial cleaning, clean the glass two or three times during each operating season, depending on the environment.
Log Set and Lava Rock Material Installation
1.Remove window frame assembly. (See window frame removal assembly section)
2.Remove logs from packaging.
Warning: Plastic bags are not toys and should be kept away from children and infants.
3.Place rear log (KR10) on rear bracket (ensure log is seated. properly, levelled and centred to the unit), so it will not move from side to side and is firmly positioned on the bracket.
4.Slip front ember log (KR7) down behind the front deflector.
5.Place front left log (KR8) on top of burner, left side. Using the bottom holes in the log, locate it into the left bracket log locator studs.
6.Place front right log (KR9) on top of burner, right side. Use the log’s bottoms holes to locate it into the right bracket log locator studs.
7.Place burner lava rock on top of burner between the ember log and the two front logs.
8.Place top left log (KR11) onto locator notches. Ensure the log is secure.
9.Place top right log (KR12) onto locator notches. Ensure log is secure.
Fig. 3 Logs for the RFSDV34 gas log fire
Maintenance
Raypak Australia recommends that this appliance is serviced by qualified and licensed Service Person at least once a year.
For service repairs and maintenance, Contact Rheem Service on 131 031.