CHARGING BATTERY

qCharging the Battery

Charge the battery prior to use.

Initial charge time: 12 hours

Recharge time: up to 12 hours, even if the light turns green. Recommended maximum charging time is 24 hours.

Always charge the battery immediately after riding.

Fully charge battery before storing for extended periods of time.

Unplug charger from the wall outlet when not in use.

Failure to recharge battery periodically may result in a battery that will not accept a charge.

Make sure scooter power switch is turned OFF when unit is not in use. If the power switch is left on for an extended period of time, the battery may reach a stage at which it will no longer hold a charge.

To ensure long battery life, never store the product in freezing or below freezing temperatures! Freezing will permanently damage the battery.

Run time: Up to 40 minutes of continuous ride time. Run time may vary depending on riding conditions, climate and/or proper maintenance.

Constant stopping and starting may shorten ride time.

Average battery life for a properly maintained unit is approx. 250 charge/discharge cycles.

WARNING: Rechargeable batteries are only to be charged under adult supervision. Always disconnect your scooter from the charger before cleaning with damp cloth.

Note: If your charger does not look like the one illustrated, your unit has been supplied with an alternative charger. The specifications and charging procedure would not change.

The charger has a small window with one LED light to indicate the charge status. Refer to the illustration on the charger unit for the actual “charging” and “charged” status indications for your model charger.

Chargers have built-in over- charge protection to prevent battery from being over-charged.

Charger

Charger Charger

PlugPort

LED Light

1Plug the charger into a wall outlet. If the lights on charger do not light up, check the power to the outlet. If necessary, try a different outlet.

2 Turn scooter power switch OFF before charging. Plug the charger into the charger port on the electric scooter.

Charger may get warm during use. This is normal for some chargers and is no cause for concern. If your charger does not get warm during use, it does not mean that it is not working properly.

WARNING: Battery charge can deplete over time. Periodically recharge battery when not in use.

PRE-RIDE CHECKLIST

q Brake

Check the brakes for proper function. When you squeeze the lever, the brake should provide positive braking action. Make sure that brakes are not rubbing.

q Frame, Fork and Handlebars

Check for cracks or broken connections. Although broken frames are rare, it is possible for an aggressive rider to run into a curb or wall and wreck, bend or break a frame. Get into the habit of inspecting your scooter on a regular basis.

q Tires

Periodically inspect the tires for excess wear and regularly check the tire pressure. Re-inflate as necessary.

q Hardware

Check all parts such as nuts, bolts, cables, fasteners, etc. to ensure they are secure and assembled correctly. If the unit is damaged do not ride. Reference “Safety Warnings” on page 1 of this manual.

q Laws and Regulations

Always check and obey any local laws or regulations.

q Insurance

Do not assume that your existing insurance policies necessarily provide coverage for scooter use. Check with your insurance company for information regarding insurance.

5

Page 6
Image 6
Razor E300s owner manual Charging Battery, PRE-RIDE Checklist