Sleep Timer, Wake-Up Timer

TV/VCR Features

Using the TV/VCR Features

Sleep Timer

The sleep timer automatically turns the TV/VCR off after 30, 60, 90, or 120 minutes.

1. Press SLEEP on the remote to select 30, 60, 90 or 120 minutes.

2. To cancel the sleep timer, press SLEEP until the timer disappears.

You can also access the sleep timer through the menu system.

1. Press MENU on the remote to display the TV/VCR MAIN MENU.

2. Press 2 to display the TIME menu.

3. Press 2 to display the SLEEP TIMER screen.

4. Press CHAN up or down to select 30, 60, 90, or 120 minutes.

5. Press MENU three times to exit.

While watching a program, press DISPLAY to check the amount of time remaining before the TV turns off.

6. To cancel the sleep timer, first display the SLEEP TIMER menu by repeating steps 1-4 above. Then, repeatedly press CHAN up or down until 0:00 is displayed on the screen.

Wake-Up Timer

The timer turns the TV/VCR on at a desired time. You can set it to wake you up in the morning or remind you that a favorite program is about to start.

1. Press MENU on the remote to display the TV/VCR MAIN MENU.

2. Press 2 to display the TIME menu.

3. Press 3 to display the WAKE-UP TIMER menu.

4. Use the number buttons to enter the channel number and time.

•After you enter the time, press 1 for AM or 2 for PM. Example: For a time of 5:07PM, press 5, then 0, then 7, then 2.

•Press CLEAR to correct an entry or RESET to clear the timer.

5. Press MENU to set the timer.

•The wake-up timer will turn on the TV/VCR every day. The WAKE- UP indicator light on the front panel is illuminated when the wake-up timer is set.

•Once the TV/VCR is turned on by the wake-up timer, the unit

automatically turns off after 60 minutes if no buttons are pressed.

Note: When the wake-up timer turns on the TV/VCR, the volume level does not change from when the TV/VCR was last turned off.

6. To cancel the wake-up timer, first display the WAKE-UP TIMER menu by repeating steps 1-3 above. Then, press RESET to cancel the timer, and press MENU to exit. The timer is also canceled if MENU is pressed before step 4 is completed.

Important: The Wake-Up Timer cannot be set while the TV/VCR is in any DC mode. A timer set in AC mode will not turn on the TV/VCR if the TV/VCR is in DC standby mode.

Front Panel Block

Selecting this option lets you block (disable) or unblock (enable) the TV's front panel buttons. Any timer recordings will still record (provided there is a tape in the VCR). Front Panel Block can keep children from watching TV or playing with the TV buttons when a parent is not present.

1.With the TV/VCR on, press and hold the POWER button on the remote for approximately 6 seconds. The indicator in the Power button flashes.

The indicator in the Power button flashes if the STOP/EJECT or POWER buttons on the front panel are pushed but nothing will happen.

To turn off the Front Panel Block, press and hold the POWER button for 6 seconds.

Important: This feature is not available in any DC mode.

CH 08

Sleep Timer 0:30

10/31/98 Sat 0:800 AM SLP

TV/VCR MAIN MENU

1Screen

2 Time

TIME

1 Set Time and Date

2 Sleep Timer

SLEEP TIMER

Turn off TV in 0:00

Press Channel up or down to adjust timer. Press MENU to exit