Buttons
Numbers (0 through 9)
Select a channel up to 99 by pressing two numbers.
Select a cable channel over 99 by pressing and holding 1 until 1– – appears on the screen. Then press the other two numbers.
OFF
Turns the TV/VCR off.
PAUSE
Pauses the tape during playback.
Pauses the tape during recording to prevent recording of unwanted scenes.
PLAY
Plays a tape.
PREV (Previous channel)
Switches between the last two channels selected.
Select one channel and then select the other using the number buttons. Press PREV to switch between the two channels.
REC (Record)
Starts TV/VCR recording.
Used for express recording.
RESET
Resets video functions to factory settings.
Used to reset time for
REW (Rewind)
Rewinds the tape when the TV/VCR is stopped.
Searches the picture in reverse during playback.
Using the Remote Control
SKIP/SEARCH
Operates Commercial Skip during TV viewing. (This only works when there is no tape in the TV/VCR.)
Displays INDEX, ZERO, and BLANK search screens when tape is inserted in the TV/VCR.
Operates Commercial Scan by advancing tape 60 seconds during playback.
SLEEP
Sets TV/VCR to automatically turn off in 30, 60, 90, or 120 minutes. See page 10.
SPEED (Tape Speed)
Selects a recording speed (SLP, SP, or LP).
STOP
Stops functions such as record, play, rewind, fast forward, and pause.
TRACK + and –
(Tracking up and down)
Lets you manually adjust tracking to reduce the streaks that may appear in the picture during playback.
TV
Turns on the TV/VCR.
In DC mode, press and hold for more than 3 seconds to turn on the TV/VCR.
VCR
Turns on the TV/VCR.
In DC mode, press and hold for more than 3 seconds to turn on the TV/VCR.
VOL < and > (Volume up and down)
Raises and lowers sound.
7
