![](/images/new-backgrounds/1279963/27996311x1.webp)
Setting Up the TV/VCR
Startup
8. Select the language.
(Escoja un idioma./Choisissez une langue.)
This feature lets you select English, Spanish, or French as the language for your
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 1 to display the SCREEN menu.
C. Press 3 to toggle the menu language between English, Spanish and
French. The default menu language when you first turn on the
TV/VCR is English.
9. Put Channels into Memory (Auto Channel Search)
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 5 to display the SETUP menu.
C. Press 1 to start AUTO CHANNEL SEARCH.
D.Allow the TV/VCR to search for all channels. Pressing any buttons during Auto Channel Search will stop the search and only some channels will be in the TV/VCR’s memory. When the search is finished the TV/VCR will automatically tune to the first channel in the channel memory list.
TV/VCR MAIN MENU
1 Screen
Screen
1 Picture Quality
2 Closed Captioning
3 Menu Language: English
(Idioma/Langue)
0 Exit
TV/VCR MAIN MENU
1Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
SETUP
1 Auto Channel Search
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
10. Set the Signal Type (optional)
The TV/VCR automatically selects the signal type (cable or antenna) when you run the Auto Channel Search in step 8. If you want to change the signal type, follow the directions below.
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 5 to display the SETUP menu.
C. Press 5 to toggle the Signal Type between ANTENNA and CABLE.
•After changing the signal type, you may need to
•After changing the signal type, you may need to Auto Channel Search again.
TV/VCR MAIN MENU
1Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
SETUP
1 Auto Channel Search
2 Add/Remove Channels
3 Set Auto Repeat
4 Auto Play: ON
5 Signal Type: CABLE
0 Exit
4