RCA 25110 manual Handset Set Up, Display Language, Tone/Pulse Dialing, Area Code

Connections & Setup

Handset Set Up

There are six programmable menus available: Display Language, Tone/Pulse Dialing, Local Area Code, Ringer Tone, Ringer Volume and Factory Default.

When you program these settings, make sure the phone is OFF (not in talk mode). Pressing the *Exit button will remove you from the menu selection process without changing the feature you are in.

Display Language

1.Press the Prog/Flash button until 1ENG 2FRA 3ESP shows in the display.

2.Use the CID/Vol ( 5 or 6 ) buttons or the handset number pad to select 1.ENGLISH, 2.FRANCAIS, or 3.ESPANOL. The default setting is 1ENG.

3.Press the Prog/Flash button to confirm. You will hear a confirmation tone.

Tone/Pulse Dialing

1.Press the Prog/Flash button until 1TONE 2PULSE shows in the display.

2.Use the CID/Vol ( 5 or 6 ) buttons or the handset number pad to select

(1)TONE or (2) PULSE. The default setting is TONE.

3.Press the Prog/Flash button to confirm. You will hear a confirmation tone.

Area Code

1.Press the Prog/Flash button until - - - SET AREA CODE shows in the display.

2.Use the handset touch-tone pad to enter your three digit area code. - - - is the default setting.

3.Press the Prog/Flash button to confirm. You will hear a confirmation tone.

18