Other Information
Headset Battery
CAUTION: To reduce the risk of fire or personal injury, only use Thomson Inc. approved
1.Make sure the telephone is OFF (not in TALK mode) before you replace battery.
2.Remove the foam cover and open the battery compartment door on the headset.
3.Disconnect the cord attached to the battery pack from the jack inside the battery compartment and remove the battery pack.
4.Insert the new battery pack and connect the plug on the battery pack to the jack inside the compartment.
NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment. To ensure proper battery installation, the connector is keyed and can be
inserted only one way.
5.Close the battery compartment by snapping the cover into place.
6.Replace the foam cover.
7.Place the headset in the charging cradle.
Allow the headset battery to properly charge (for 16 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised.
Battery Safety Precautions
•Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury.
•To reduce the risk of fire or personal injury, use only the battery listed in the User’s Guide.
•Keep batteries out of the reach of children.
•Remove batteries if storing over 30 days.
33
